Story image

5 tips to reduce data centre transceiver costs

17 Jan 2019

Article by Keysight Technologies Data Center Infrastructure Solutions Lead Nicole Faubert

Massive growth in network traffic is urgently driving the need for bandwidth upgrades from 100 gigabit Ethernet (GE) to 400GE in the data centre. Large hyperscale data centres have more than 50,000 optical fibers in them. With a transceiver at each end of the fiber, these data centres house upwards of 100,000 transceivers. Keeping the cost of optical transceivers low is a high priority for data centre operators. To be competitive, transceiver manufacturers must find ways to drive down production costs.

Like most new technologies, the price of next-generation optical transceivers tends to drop sharply after introduction to the market, and development costs amortise as volume ramps. Next-generation transceiver technology, such as 400GE, will reach mature pricing within a year of introduction. At maturity, the cost of transceivers is directly proportional to the complexity of the design and the number of optical components. Test time contributes significantly to the overall transceiver cost. More efficient testing of the broad range of transceiver data rates accelerates innovation and lowers cost. Here are five tips that can help you significantly reduce test time and subsequently the cost of next-generation transceivers.

Tip 1. Design and simulation

In the research and development (R&D) phase, starting with powerful design simulation software is the first step to ensure test efficiency and lower test cost. Today's design and simulation software enable transceiver designers to optimise their designs, ensure performance and robustness, and avoid costly additional board design cycles. They can identify the most sensitive design components early on and decide how to set specifications to improve manufacturing yield. Once optimised, designers can test design performance using post-processing data analysis functionality without rerunning simulations.

Tip 2. Characterisation and compliance test

Once deployed in data centres, marginally performing transceivers can bring down the network link, lowering the overall efficiency of the data centre as the switches and routers need to re-route the faulty link. The cost associated with failed transceivers once deployed in the data centre is enormous. In a hyperscale data centre with more than 100,000 transceivers, even a small one-tenth of one percent failure rate would equate to 100 faulty links.

Industry standards organisations, such as the Institute of Electrical and Electronics Engineers (IEEE), International Committee for Information Technology Standards (INCITS) and the Optical Internetworking Forum (OIF), generate and maintain optical transceiver specifications and define test procedures to ensure interoperability of modules from different vendors. The operating margins in 400GE optical links are the tightest of any generation yet, creating additional test challenges as small measurement errors can quickly consume the entire operating margin. Fortunately, the methods that describe how to characterise 400GE designs are becoming more stable, and engineers can review and follow the guidelines outlined in the standards when developing their transceiver characterisation test plans.

Tip 3. Test automation

Test automation software can reduce test time down from hours to minutes. Choosing automated compliance test software verified to test to the exact specifications of each technology standard is essential. Test automation software provides insights to the test engineer about any detected issues and can quickly pinpoint failures, saving hours of debug time. Test automation software guides the test engineer through setup, calibration and compliance measurements, and allows them to quickly run through test cases without being an expert on test procedures. More importantly, ensuring transceivers are compliant to standards will minimise the risk of interoperability issues with network switches and routers once installed in data centres around the world.

Tip 4. Data analytics

The results of automated tests are available to test engineers in real-time reports. These reports typically include details about the test setup and configuration, the measurements made, the pass/fail status, margin analysis, and output waveforms. With this information, it is easy for test engineers to replicate the test scenario later. However, sometimes the sheer amount of data collected is overwhelming for a test engineer to analyse and understand. Therefore, test automation software with integrated data analytics capabilities is ideal.

Data analytics tools provide insightful analysis of test results. Visualisation methods, such as line and histogram charts, show pass/fail limits and statistical information, so test engineers can see at a glance the performance of the device under test. Data analytic tools often store results in a cloud repository, making it fast and easy to share the results among global and distributed teams. Test engineers can quickly make design decisions with confidence that would otherwise take days or weeks for them to analyse and resolve.

Tip 5. Manufacturing test

Research and development of 400GE transceivers is well underway. Engineers are still struggling with how to test PAM4 modules, and 400GE standards are continuing to evolve. 400GE transceivers have a tight time-to-market window to meet the demands of emerging technologies such as 5G and IoT, as well as the massive growth of the public cloud infrastructure. Once 400GE transceivers reach the manufacturing phase, any issues found will mean a costly rework of designs. The ideal is to design for manufacturing. Several tools can help transceiver manufacturers create manufacturing-friendly designs. Costs increase significantly as issues are uncovered later in the development process.

Get to market faster

The data centre transceiver market is extremely cost sensitive and competitive. Test time is a significant factor that contributes to the overall cost of transceivers. By reducing test time, transceiver manufacturers can reduce costs and be first-to-market with next-generation transceivers. At each phase of the product development lifecycle, there are test solutions that can be used to maximise test efficiency. These tools can shorten design cycles, dramatically improve productivity, ensure quality and significantly reduce costs.

Enterprise cloud deployments being exploited by cybercriminals
A new report has revealed a concerning number of enterprises still believe security is the responsibility of the cloud service provider.
Pure Storage expands enterprise data management solutions
It has integrated StorReduce technologies for a cloud-native back up platform, and expanded its data fabric solution for cloud-based applications.
HPE launches new real-time processing edge platform
The platform is said to help communication service providers (CSPs) to capitalize on data-intensive, low-latency services for media delivery, connected mobility, and smart cities.
‘Digital twins’ entering mainstream use sooner than expected
The term ‘digital twin’ may sound foreign to some, but Gartner says it is rapidly becoming established among modern organisations.
Infinera launches new ‘disruptive’ network architecture
The new end-to-end network architecture is said to enable instantly scalable, self-optimizing networks that adapt to the demands of specific users and applications.
Survey finds DC managers want more efficiency, not horsepower
More servers and more CPU power used to be the answer to boosting data centre performance, but it appears this is no longer the case.
DOCOMO ranked world's top mobile operator in 5G SEP applications
NTT DOCOMO has been ranked the world's leading mobile operator in terms of applications for candidate standard-essential patents.
Nlyte celebrates record year and new board chairman
The company recently announced a strong 2018 calendar year after adding more new customers than any other year in its 15-year history.