Story image

12v vs. 48v: Calculating the energy savings of OCP-style PSUs

25 May 18

Organizations like Open Compute Project (OCP) and Open19 have created open standards for alternatives to conventional server designs.

These architectures redefine how power is converted and distributed within an IT rack. Centralized rack-level power supply units (PSU) replace internal server power supplies.

12V has been the standard output for power supplies, but recently we’re seeing 48V, with claims of much higher overall efficiency.

Why 48V? It comes down to the quest for improved compute performance, which requires increasing the power to the chip, and at 12V, this isn’t practical.

I’ll explain why in another blog.

Efficiency: A Compare and Contrast Story

We thought it was important to research this topic to understand the expected efficiencies from the PSU to the server point of load (the components within the servers).

We created a model to illustrate the differences between the architectures, show the main drivers of the electrical losses, and see how varying parameters like redundancy of PSUs, oversizing of PSUs, and component efficiencies can impact the resulting overall efficiency.

The calculator allows you to analyze the power path efficiency of the different architectures, starting from the input power of the rack (PSU input), down to the voltage regulator modules (VRM) within the servers that deliver power to the individual server components.

Specifically, we looked at comparing conventional servers (PSUs within each server) and centralized rack-level PSUs, both 12V & 48V DC approaches.

With the default settings in our tool, the efficiency of the 12V rack level PSU architecture is 7 percentage points better than conventional servers (or 33% reduction in losses), and 48V is just over 1 percentage point better than 12V rack-level (7% reduction in losses).

So where does the efficiency improvement come from?

Redundancy - Centralizing PSUs to the rack allows for N+1 redundancy to be achieved for each rack, meaning there is one extra PSU per rack of servers (i.e. 5+1) rather than one extra for every server (1+1) which is typical for conventional servers.

This reduction in power converting components increases the overall efficiency of the system.

Oversizing - Conventional PSUs tend to have an oversizing factor between 2x and 3x, whereas a consolidated rack-level PSU will have less oversizing (we assume 1.2).

More efficient components - The most common grade of PSU used in data centers is 80 Plus Silver standard, which has a max efficiency of 88%.

In comparison, data shows 94% and 95% max efficiencies for 12V and 48V rack-level PSUs, respectively (based on data from General Electric). There is also likely to be an efficiency improvement in the VRM when the conversion occurs at 48V instead of 12V.

Findings from the Expert

Here are what I believe the key takeaways are from this analysis:

  • Rack-level architectures do show significant improvement in efficiency over conventional servers, primarily due to the reduction in oversizing of the PSUs (both from less redundancy “overhead” and consolidation of server PSUs).
  • 48V direct current is a likely bet for the future, not for the incremental efficiency improvement over 12V direct current, but because of the need for increased compute and density.

What do you think?

Article by Wendy Torell, Schneider Electric blog network. 

Schneider Electric's bets for the 2019 data centre industry
From IT and telco merging to the renaissance of liquid cooling, here are the company's top predictions for the year ahead.
China to usurp Europe in becoming AI research world leader
A new study has found China is outpacing Europe and the US in terms of AI research output and growth.
Google says ‘circular economy’ needed for data centres
Google's Sustainability Officer believes major changes are critical in data centres to emulate the cyclical life of nature.
52mil users affected by Google+’s second data breach
Google+ APIs will be shut down within the next 90 days, and the consumer platform will be disabled in April 2019 instead of August 2019 as originally planned.
Ramping up security with next-gen firewalls
The classic firewall lacked the ability to distinguish between different kinds of web traffic.
Platform9 aims to allow enterprises to run Kubernetes instantly
Snapfish, HPE, and Juniper use Platform9’s hybrid cloud solution to deliver a modern cloud infrastructure-as-a-service experience.
DigiPlex’s data centre heat reuse system wins award
Its solution to reuse heat to warm thousands of local homes took out the accolade at the recent 2018 Energy Awards.
STT GDC to build hyperscale data centre in Singapore
ST Telemedia Global Data Centres (STT GDC) today unveiled ambitious plans for expansion with its largest data centre in Singapore to date.